Model ship plans pdf

Wooden ship models or wooden model ships are scale representations of ships, model ship plans pdf mainly of wood. This type of model has been built for over two thousand years.


Solid wood hull sawn and carved from a single block of wood. Gluing together two thinner blocks of wood so that a block is formed with the seam vertical, so that the seam will show running down that surface of the block which is to be the deck.

No advantage is gained by having the seam show along the sides of the hull. In this case, the slabs will be oriented so that they sit one on top of the other. Plank on bulkhead, a technique in which a series of shaped bulkheads are placed along the keel to form a shaped stage which will be covered with planks to form the hull of the model. Plank on frame In this technique, the model is built just as the full size wooden ship is constructed.

The keel is laid down in a manner which keeps it straight and true. The sternpost and stem are erected, deadwood and strengthening pieces inserted, and a series of shaped frames are built and erected along the keel to form the internal framework of the model.

The planks are then applied over the frame to form the external covering. Instead of using plans made specifically for models, many model shipwrights use the actual blueprints for the original vessel. One can take drawings for the original ship to a blueprint service and have them blown up, or reduced to bring them to the new scale.

You can use the conversion table below to determine the percentage of change. You can easily work directly from the original drawings however, by changing scale each time you make a measurement. It is easier to make measurements in the metric system and then multiply them by the scale conversion factor.

Scales are expressed in fractional inches, but fractions themselves are harder to work with than metric measurements. For example, a hatch measures 1″ wide on the draft. Measuring the hatch in metric, you measure 25┬ámm.

16″, according to the conversion table is . Conversion is a fairly simple task once you start measuring in metric and converting according to the scale.

There is a simple conversion factor that allows you to determine the approximate size of a model by taking the actual measurements of the full-size ship and arriving at a scale factor. It is a rough way of deciding whether you want to build a model that is about two feet long, three feet long, or four feet long. Here is a ship model conversion example using a real ship, the Hancock. This is a frigate appearing in Chappelle’s History of American Sailing Ships.